Natural river sand is restricted in mining, and the severe shortage has caused the price of sand and gravel aggregates to soar, and machine-made sand has been produced as the times require. A scientifically configured and reasonable sand washing production line can not only effectively improve the operating efficiency of the entire production line and obtain high-quality machine-made sand, but also allow customers to recover costs in a shorter time, thereby reaping greater economic benefits, so how to configure A reasonable sand washing production line should pay attention to the following points, which will be introduced in detail below.
To configure a reasonable sand production line, you need to pay attention to the following aspects
1. There must be a complete process
A complete process is a necessary condition for a reasonable and economical sand washing production line. In addition to sand making, the sand washing production line also needs to have coarse crushing, medium crushing, fine crushing, and later screening and sand washing links. Multiple links are closely interlinked and indispensable. The feed size of the sand-making equipment is within 60mm. If the crushed material is too large, it needs to be cycled in the early stage.
2. The production line process should be convenient and concise
The process of a reasonable sand washing production line is relatively scientific. While ensuring normal operation, it should follow the principles of simplicity, low investment, and reasonable spatial layout.
3. Configuration of supporting equipment
In addition to the necessary equipment, some supporting equipment is also indispensable, such as dust removal and noise removal devices. They can not only effectively improve the working environment and ensure green production, but also effectively reduce the noise generated by the machinery and stone crushing in sand production, and ensure that the amount of dust and noise on the job site is within the scope of national environmental protection regulations.
Introduction to the equipment needed to configure a reasonable sand washing production line
The equipment type and model of the sand washing production line are not randomly matched. According to the water content, hardness, processing capacity, etc. of the processed raw materials, appropriate types of crushing, sand-making, sand-washing, and screening equipment should be configured.
Depending on the feed size, the equipment required to configure the production line is different. If the feed is between 800mm-1500mm, it needs to be roughed first, that is, it needs to be equipped with a jawbreaker. If the feed size of the processed material is between 60-800mm, before sand production, only medium and fine crushing processing is required, that is, only an impact crusher or a cone crusher is required.
3. Finished product
The particle size of the finished product must be clear because the particle size of the sand produced by the sand washing production line is determined by the vibrating screen. According to the specifications of the required sand and gravel aggregates, the appropriate type of screening equipment should be configured.
Equipment must be matched. When configuring production line equipment, there are not only requirements for individual equipment, but whether they are matched or not is more important. This is the key to ensuring the stability and effective operation of the entire production line.
Send us a message
We will provide you with the most professional services.